E6000 Adhesive Store - Australia
  • Home
  • Buy E6000
  • Specifications
  • Wholesale
  • About
    • Contact
    • E6000 Blog
    • MSDS & TDS
    • Terms Conditions
  • Home
  • >
  • All Products
  • >
  • Amazing GOOP Marine - 53.2g 2oz Clear

Amazing GOOP Marine - 53.2g 2oz Clear

SKU:
A$22.00
A$22.00
Unavailable
per item

Description

Amazing GOOP Marine has the same toughness, strength and versatility as our other GOOP products but is specially formulated to be UV resistant. It's perfect for outdoor applications on items that will be exposed to sunlight, water or extreme temperatures. Easily bonds to vinyl, rubber, metal, glass, wood and more!

  • Facebook
  • Twitter
  • Pinterest
  • Google+
Add to Cart
Amazing GOOP Marine has the same toughness, strength and versatility as our other GOOP products but is specially formulated to be UV resistant. It’s perfect for outdoor applications on items that will be exposed to sunlight, water or extreme temperatures. Easily bonds to vinyl, rubber, metal, glass, wood and more!
  • Strongest, most versatile adhesive available 
  • UV resistant – resists yellowing and cracking 
  • Paintable once cured 
  • Use indoors or out 
  • Temperature resistant – remains flexible, even in extreme temperatures 
  • Dries clear 
  • Abrasion resistant – great for bonding items subject to vibration 
  • Waterproof – bond remains secure even when exposed to water 

Instructions

Follow these step-by-step instructions for the application of Amazing GOOP Marine:
  1. Begin by reading the directions and conducting a small area test before initiating use.
  2. Ensure that the surface is clean, dry, and free from dirt for optimal results; consider roughening the surface before application.
  3. Utilize the pointer cap to puncture the seal in the tube's neck. This versatile product is suitable for use within the temperature range of 50 to 90 °F (10 to 32 °C). However, the fully cured adhesive exhibits resilience to temperatures ranging from -40 to 180 °F (-40 to 82 °C) intermittently.
  4. Apply the adhesive directly to each surface intended for bonding or repair. Allow it to partially cure for approximately 2 minutes before bringing the surfaces together. The adhesive solidifies through solvent evaporation, creating an immediate bond that becomes challenging to reposition once both adhesive-coated surfaces are in contact, and sufficient pressure is applied to establish full contact.
  5. Allow the repair to cure for 24 hours. Depending on the materials involved and the prevailing temperature, maximum strength may take 48 to 72 hours to be achieved.
  6. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
  7. Clean uncured adhesive with acetone or citrus-based solvents. If dealing with cured material, removal may be accomplished by cutting or scraping.

​Frequently Asked Questions (FAQs):

Q: How much time does it take for Amazing GOOP Marine to dry?
A: A complete cure spans from 24 to 72 hours, contingent upon the surrounding environment. In conditions of lower temperatures and higher humidity, the cure time extends, whereas higher temperatures expedite the process. To hasten drying, employ a handheld dryer set on low heat, maintaining a distance of at least 6 inches from the surface.

Q: How can one clean up Amazing GOOP Marine?
A: For uncured adhesive, small amounts of acetone or citrus-based solvents can be used; the adhesive will form into a ball and can be brushed off. Cured adhesive, on the other hand, may be removed through cutting or scraping.

Q: Is Amazing GOOP Marine water-resistant?
A: Absolutely. Amazing GOOP Marine exhibits water resistance immediately upon application. Apply it directly to the surface requiring sealing, using thin coats to construct a thick coating. Allow each layer to set for 3 to 4 hours, particularly beneficial for smooth surfaces like plastic, glass, or ceramic. The hardening of Amazing GOOP Marine occurs through solvent evaporation, necessitating adequate time for thorough hardening to ensure proper bonding and wear resistance.

Q: What temperature range can Amazing GOOP Marine withstand?
A: Optimal application of Amazing GOOP Marine occurs within temperatures ranging from 50 °F to 90 °F (10 °C to 32 °C). Note that while it can be applied outside this temperature range, the cure time may significantly increase. Once fully cured, Amazing GOOP Marine can endure temperatures between -40 °F and 180 °F (-40 °C to 82 °C).

​​Technical Data Sheet (TDS):

tds-amazing-goop-marine-australia.pdf
File Size: 807 kb
File Type: pdf
Download File

Product Part Number (Australia): ​AU10170036
USA Equivalent Part Number: 170036
Product SKU: 076818013921​
Shop All GOOP Adhesives

E6000 Quick Hold Adhesive - 59.1ml 2oz Clear

Shop

Amazing Goop Auto & RV Adhesive by E6000 - 2oz/53.2g

Shop

Amazing GOOP Marine - 53.2g 2oz Clear

Shop

Seal All Automotive - 59.1ml 2oz Clear

Shop

GOOP Plumbing - 52.5g 2oz Clear

Shop

Amazing GOOP Marine - 271.4g 10.2oz Clear - Cartridge

Shop

Amazing GOOP II Max Outdoor - 81g Clear

Shop

Amazing GOOP All Purpose - 26.2g Clear

Shop
© 2025 Alexandra Bay Pty Ltd Australia. All prices displayed are in Australian Dollars and shown including GST  -  Contact Us
Flat Rate Shipping - FREE Shipping Available on orders of $60+  -  We are only able to supply customers within Australia.
  • Home
  • Buy E6000
  • Specifications
  • Wholesale
  • About
    • Contact
    • E6000 Blog
    • MSDS & TDS
    • Terms Conditions