E6000 Product InstructionsFollow these directions when using Regular E6000 Adhesive
1. Use in a well-ventilated area only. 2. Surface should be clean, dry and free from dirt. 3. Roughen surface before use. 4. Best when used between 21°C and 29°C.| 5. Apply E6000 directly to the surface. 6. For maximum strength, allow bond to dry for 24-72 hours. 7. Cure time increases in lower temperatures, decreases in higher temperatures. 8. Clean uncured adhesive with acetone. 9. Cured material may be removed by cutting and scraping. 10. Not for use on polystyrene, polyethylene or polypropylene plastics. |
|
E6000 Scientific Specifications
|
Cured E6000
Hardness: 80A
Tensile strength: 3,500 lb/in2 (ASTM D-412) Elongation: 900% (ASTM D-412) Chemical resistance: excellent to water, dilute acids & bases Temperature range: -40 °C to 66 °C Paint-over time: 24 hours UV resistance: paint over with UV Sealer if required Dielectric strength: 400 V/mil (ASTM D-149) |
Un-Cured E6000
Solids: 30% by weight
Density: 11.1 lbs./gal. VOC: 1.198 grams/liter Tack time: 5 minutes Full cure time: thin film: 24 hours; thick film: 48-72 hours Storage: store between 10 °C and 27 °C Freeze/thaw stability: yes; open and use at room temperature. Color: clear Viscosity: 50,000 cps (Low), 100,000 cps (Med), 200,000 cps (H) Shelf life: 2 years, when left unopened |
Frequently Asked Questions
What temperature range can E6000 adhesives withstand?
The application temperature range for E6000 is 10 °C to 32 °C. Once cured, E6000 can withstand temperatures ranging from -40 °C to 66 °C.
Is E6000 adhesives UV resistant?
Cured E6000 adhesive can be painted with a suitable UV Sealer for maximum resistance.
Can E6000 be used on poly foam?
No. Standard E6000 can not, however E6000 Spray Adhesive is suitable polystyrene, polyethylene or polypropylene plastics.
How should I store my E6000 after opening?
Ensue the lid is tightly sealed and store in a cool dry environment. In hot climates, wrap the tube in plastic and store in a fridge. Return to room temperature before opening and use.
Is E6000 better than Super Glue?
While super glue is good for a quick temporary fix, E6000 is quite the opposite. It takes longer to cure, however it sets strong, clear and permanent. E6000 won't become brittle and crack like super glue can.
Will E6000 crack or break under stress or vibrations?
E6000 adhesive will dry to a rubber-like consistency which makes it flexible and moves with the vibrations rather than failing.
How long does E6000 take to dry?
E6000 starts getting tacky in around 2 minutes and begins setting in 10 minutes. A full cure takes between 24 and 72 hours.Remember, temperature and humidity will affect dry time.
How do I clean up E6000 adhesives?
Uncured E6000 will roll off most surfaces. You can also use a small amount of acetone. Cured E6000 can be cut or scraped off.
MSDS & Technical Data Sheets
Use these links to download PDF copies of the official Material Safety Data Sheets (MSDS) and Technical Data Sheets (TDS). These documents are provided for information purposes and to comply with relevant legislation regarding chemicals, DG Management and Workplace Health & Safety.
|
| ||||
FOR ALL POISONS RELATED EMERGENCIES (WITHIN AUSTRALIA ONLY) PLEASE CALL
POISONS INFORMATION CENTRE - PHONE 13 11 26 or Emergency - PHONE 000
POISONS INFORMATION CENTRE - PHONE 13 11 26 or Emergency - PHONE 000
Product Returns & Warranty
This product and the transactions associated with it are subject to relevant laws within Australia. Alexandra Bay Pty Ltd complies with the Trade Practices Act. The following will not detract in any way from the consumer rights as dictated by relevant legislation. If any part of the following information is found to be in breach of legislation or unable to be upheld is to be omitted without affecting the remainder.
Returns & Refunds: A product may be returned in original sealed unaltered condition within 90 days of purchase for a full credit of original purchase price excluding any freight and handling charges, to be applied to a future purchase. A full refund is available if a product is faulty, incorrectly described or not fit for a stated purpose.
Limited Warranty: The product is warranted against any defect in materials or workmanship, providing a claim is made in writing within 6 months after the sale of the product. Alexandra Bay Pty Ltd makes no express or implied warranties of any kind, including the implied warranties for fitness for any particular purpose other than those stated herein. THE REMEDIES PROVIDED HEREIN ARE THE EXCLUSIVE REMEDIES TO BUYER, AND SELLER SHALL NOT BE LIBEL FOR ANY LOSS, INJURY, OR DAMAGES TO PERSONS OR PROPERTY RESULTING FROM FAILURE OF THE PRODUCT OR ANY DEFECT IN THE PRODUCT SOLD HEREUNDER, OR ANY DELAY IN PERFORMANCE BY SELLER, NOR WILL SELLER BE LIABLE FOR DIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL OR ECONOMIC DAMAGES OF ANY KIND, OR FOR CONTRIBUTION OR INDEMNITY CLAIMS, HOWEVER CAUSED, WHETHER FOR BREACH OF WARRANTY, CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, OR OTHERWISE.
Returns & Refunds: A product may be returned in original sealed unaltered condition within 90 days of purchase for a full credit of original purchase price excluding any freight and handling charges, to be applied to a future purchase. A full refund is available if a product is faulty, incorrectly described or not fit for a stated purpose.
Limited Warranty: The product is warranted against any defect in materials or workmanship, providing a claim is made in writing within 6 months after the sale of the product. Alexandra Bay Pty Ltd makes no express or implied warranties of any kind, including the implied warranties for fitness for any particular purpose other than those stated herein. THE REMEDIES PROVIDED HEREIN ARE THE EXCLUSIVE REMEDIES TO BUYER, AND SELLER SHALL NOT BE LIBEL FOR ANY LOSS, INJURY, OR DAMAGES TO PERSONS OR PROPERTY RESULTING FROM FAILURE OF THE PRODUCT OR ANY DEFECT IN THE PRODUCT SOLD HEREUNDER, OR ANY DELAY IN PERFORMANCE BY SELLER, NOR WILL SELLER BE LIABLE FOR DIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL OR ECONOMIC DAMAGES OF ANY KIND, OR FOR CONTRIBUTION OR INDEMNITY CLAIMS, HOWEVER CAUSED, WHETHER FOR BREACH OF WARRANTY, CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, OR OTHERWISE.