Seal All Automotive - 59.1ml 2oz Clear
Seal All, by E6000 is the Mechanic's Choice Automotive Contact Adhesive and Sealant. This quick-set EZ-Flo Formula is gas, fuel, thinner, solvent and oil resistant. Perfect for use on metal, most plastics and many substrates. It dries clear, permanent and waterproof.
Dry time: 2-3 minutes.
Cure time: 2-6 hours (full cure)
Temp Range: -40c to 66c
UV Resistance: Paint over for maximum resistance.
- Fast dry time – set in 2-3 minutes
- E-Z flow formula
- Gas & oil resistant
- Water resistant – bond remains secure even when exposed to water
- Abrasion resistant
- Temperature resistant – remains tough even in extreme temperatures
- To open, puncture the seal with the pointer cap. Keep the tube upright until ready to use. Avoid squeezing the tube to force opening. Remember to replace the cap after each use.
- For use as a sealant, apply directly to a clean, dry surface. Hold firmly until the product sets. Additional coats may be applied, ensuring each layer dries thoroughly. In cases of leaks on objects under pressure, tape over Seal-All with Duct or masking tape. Additional coats can be applied over the tape.
- When using Seal-All as a contact adhesive, spread the coating on each surface to be joined together. Allow it to harden for 5-10 minutes, then press both surfaces together. Seal-All hardens through solvent evaporation, forming an immediate bond that is challenging to reposition after both adhesive-coated surfaces are in contact, and sufficient pressure is applied to create full contact.
- Seal-All will set in about 2-3 minutes and reach full cure in 2-6 hours. Keep in mind that cure time increases with lower temperatures and decreases with higher temperatures.
- For UV resistance, paint over Seal-All.
- Ensure the threads at the neck of the tube remain free of Seal-All residue.
- Store unused Seal-All at room temperature with the cap tightened.
Frequently Asked Questions (FAQs):
A: Seal-All distinguishes itself with its remarkable resistance to gasoline, oil, paint thinner, and the majority of solvents. Additionally, Seal-All exhibits immediate water resistance upon application.
Q: On which substrates can Seal-All establish a strong bond?
A: Seal-All showcases superior bonding strength across all substrates and materials, excluding paper, cardboard, and Styrofoam™. Prior to full use, it's advisable to conduct a small test in a specific area.
Q: What is the drying time for Seal-All?
A: Seal-All achieves setting in 2-3 minutes and attains full cure within 2-6 hours. It's important to note that the drying time may be influenced by temperature and humidity.
Q: Is Seal-All resistant to UV rays?
A: No, Seal-All is not inherently UV resistant. However, for optimal UV resistance, it can be painted over once fully cured.
Q: What are some recommended applications for Seal-All?
A: Seal-All proves highly versatile and can be effectively employed for various purposes, including distributor caps, interior panels, radiators, gaskets, transmission carburetor floats, body and trunk leaks, battery cables and terminals, generators, tools, and numerous other applications.