This pack contains four handy 7.2g (0.18oz / 5.3ml) tubes of E6000 Industrial Strength Adhesive. Known for its exceptional bonding power, this classic formula delivers maximum strength adhesion. The individual tubes are perfect for smaller projects, allowing you to use what you need while keeping the rest sealed and fresh for future use.
Bonds Everything so you can Create or Repair Anything!
E6000 is a one-of-a-kind adhesive designed to meet the demands of high-performance, industrial-strength applications. Its unmatched flexibility and strong bond to nearly any surface make it ideal for everything from tough repairs to creative hobby and craft projects. E6000 stays incredibly flexible in all weather conditions and holds strong even in situations involving heavy movement or vibration.
Directions for Use:
Keep the lid tightly sealed when not in use. Be sure to read all instructions before applying.
- Ensure surfaces are clean, dry, and free from dust or grease. For optimal adhesion, lightly roughen the surfaces before application.
- To open, puncture the tube seal using the point inside the cap.
- Apply directly to the surfaces you wish to bond or repair. Ideal application temperature is between 10°C and 32°C. Once cured, the adhesive can tolerate intermittent temperatures ranging from -40°C to 82°C.
- Allow at least 24 hours to cure. Depending on materials and conditions, full strength may take 48–72 hours.
- To help with future cap removal, apply a thin layer of petroleum jelly to the tube threads before replacing the cap.
- Clean uncured adhesive with acetone or a citrus-based solvent. Once cured, it can only be removed by cutting or scraping.
The E6000 Adhesive 4-Tube Pack includes four compact 7.2g (0.18oz) tubes of the trusted, industrial-strength adhesive—perfect for anyone needing a reliable, versatile bonding solution. With multiple tubes on hand, you’ll always be ready for repairs, crafting projects, or heavy-duty tasks without the hassle of running out mid-job.Ideal for DIYers, hobbyists, and professionals alike, these small tubes are perfect for precise application and easy to store in a drawer or toolkit. Because you only open what you need, the remaining tubes stay sealed and fresh for future use—no risk of dried-out adhesive.
This pack is not only convenient and portable but also offers great value, especially for smaller projects where a large tube might go to waste. It’s a smart, cost-effective solution that ensures you always have E6000 ready when creativity or repair calls.
This pack is not only convenient and portable but also offers great value, especially for smaller projects where a large tube might go to waste. It’s a smart, cost-effective solution that ensures you always have E6000 ready when creativity or repair calls.
Also Available:
What temperature range can E6000 withstand?
E6000 can be applied in temperatures between 10°C and 32°C (50°F to 90°F). Once fully cured, it can handle temperatures from -40°C to 82°C (-40°F to 180°F) intermittently.
Can E6000 be used on Styrofoam™?
No. E6000 is not suitable for Styrofoam™, polystyrene, polyethylene, or polypropylene plastics, as it may dissolve or fail to bond these materials. For use on those materials, consider the E6000 Spray adhesive which can be used on foams and poly plastics.
Will E6000 crack or break under stress?
No. E6000 cures to a flexible, rubber-like consistency that moves with the bonded materials, making it ideal for applications subject to vibration or movement.
How long does E6000 take to dry?
E6000 becomes tacky in about 2 minutes and begins setting within 10 minutes. A full cure is typically achieved within 24 to 72 hours, depending on the materials, temperature, and humidity.
Can I speed up the drying time?
Yes, you can use a handheld hair dryer set to low heat to accelerate drying. Avoid applying heat directly to the adhesive.
How do I clean up E6000?
While still uncured, E6000 can be cleaned with small amounts of acetone or a citrus-based solvent. Once cured, it can only be removed by cutting or scraping.
E6000 can be applied in temperatures between 10°C and 32°C (50°F to 90°F). Once fully cured, it can handle temperatures from -40°C to 82°C (-40°F to 180°F) intermittently.
Can E6000 be used on Styrofoam™?
No. E6000 is not suitable for Styrofoam™, polystyrene, polyethylene, or polypropylene plastics, as it may dissolve or fail to bond these materials. For use on those materials, consider the E6000 Spray adhesive which can be used on foams and poly plastics.
Will E6000 crack or break under stress?
No. E6000 cures to a flexible, rubber-like consistency that moves with the bonded materials, making it ideal for applications subject to vibration or movement.
How long does E6000 take to dry?
E6000 becomes tacky in about 2 minutes and begins setting within 10 minutes. A full cure is typically achieved within 24 to 72 hours, depending on the materials, temperature, and humidity.
Can I speed up the drying time?
Yes, you can use a handheld hair dryer set to low heat to accelerate drying. Avoid applying heat directly to the adhesive.
How do I clean up E6000?
While still uncured, E6000 can be cleaned with small amounts of acetone or a citrus-based solvent. Once cured, it can only be removed by cutting or scraping.
Technical Data Sheet
|
For more technical information on E6000, please refer to the TDS:
|
| ||