Amazing GOOP II Max Outdoor - 81g Clear
SKU:
A$16.00
A$16.00
per item
Description
Amazing GOOP II MAX is the ultimate repair glue! It's toughness is unlike anything else because it remains flexible while permanently bonding virtually any material and withstanding harsh environmental elements. REAL WORLD TOUGH. REAL WORLD USE.
Amazing GOOP II MAX is the ultimate repair glue! It's toughness is unlike anything else because it remains flexible while permanently bonding virtually any material and withstanding harsh environmental elements. REAL WORLD TOUGH. REAL WORLD USE.
- UV Inhibitors - Resists yellowing or cracking when exposed to direct sunlight
- Waterproof - Tough enough to withstand very wet conditions
- Permanent - Exceptional bond strength to almost any substrate
- Temperature Resistant - Remains flexible, even in extreme temperatures
- Dries clear
Instructions:
Follow these step-by-step instructions when using Amazing GOOP II Max:
- Begin by reading the directions and conducting a small area test before use.
- Ensure the surface is clean, dry, and free from dirt for optimal results; consider roughening the surface before application.
- Use the pointer cap to puncture the seal in the tube's neck. This versatile product can be effectively utilized within the temperature range of 50 to 90 °F (10 to 32 °C).
- Apply the adhesive directly to each surface intended for bonding or repair. Allow it to partially cure for approximately 2 minutes before bringing the surfaces together. The adhesive solidifies through solvent evaporation, creating an immediate bond that becomes challenging to reposition once both adhesive-coated surfaces are in contact, and sufficient pressure is applied to establish full contact.
- Allow the repair to cure for 24 hours. Depending on the materials involved and the prevailing temperature, maximum strength may take 48 to 72 hours to be achieved.
- For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
- Clean uncured adhesive with acetone or citrus-based solvents. If dealing with cured material, removal may be accomplished by cutting or scraping.
Frequently Asked Questions (FAQs):
Q: How long is the drying time for Amazing GOOP II MAX?
A: A complete cure requires 24 to 72 hours, contingent on the surrounding environment. Lower temperatures and higher humidity extend cure time, while higher temperatures expedite the process. To accelerate drying, apply heat using a handheld dryer set on low, maintaining a distance of at least 6 inches from the surface.
Q: How can one clean up Amazing GOOP II MAX?
A: Small amounts of acetone or citrus-based solvents are effective on uncured adhesive; the adhesive will ball up and brush off. For cured adhesive, removal may be achieved by cutting or scraping.
Q: Is Amazing GOOP II MAX water-resistant?
A: Certainly, it is water-resistant immediately upon application. Apply AG II MAX directly to the surface for sealing, using thin coats to build a thick coating. Allow each layer to set for 3 to 4 hours, especially on smooth surfaces like plastic, glass, or ceramic. AG II MAX undergoes hardening via solvent evaporation, requiring time for thorough hardening to ensure proper bonding and wear resistance.
Q: What temperature range can Amazing GOOP II MAX withstand?
A: Once cured, AG II MAX will endure temperatures between -40 °F and 150 °F (-40 °C to 66 °C).
A: A complete cure requires 24 to 72 hours, contingent on the surrounding environment. Lower temperatures and higher humidity extend cure time, while higher temperatures expedite the process. To accelerate drying, apply heat using a handheld dryer set on low, maintaining a distance of at least 6 inches from the surface.
Q: How can one clean up Amazing GOOP II MAX?
A: Small amounts of acetone or citrus-based solvents are effective on uncured adhesive; the adhesive will ball up and brush off. For cured adhesive, removal may be achieved by cutting or scraping.
Q: Is Amazing GOOP II MAX water-resistant?
A: Certainly, it is water-resistant immediately upon application. Apply AG II MAX directly to the surface for sealing, using thin coats to build a thick coating. Allow each layer to set for 3 to 4 hours, especially on smooth surfaces like plastic, glass, or ceramic. AG II MAX undergoes hardening via solvent evaporation, requiring time for thorough hardening to ensure proper bonding and wear resistance.
Q: What temperature range can Amazing GOOP II MAX withstand?
A: Once cured, AG II MAX will endure temperatures between -40 °F and 150 °F (-40 °C to 66 °C).
Technical Data Sheet (TDS): |
| ||
|
Product Part Number (Australia): AU10142100
|
USA Equivalent Part Number: 142100
|
Product SKU: 076818013891
|